Optional Parts
Refine Search
4mm Turnbuckle Wrench, Spring Steel
Narrow 4mm turnbuckle wrench. Machined from "PREMIUM" spring steel and sporting laser-etched marking..
$7.00
A12-AT1204-ZT-S
Awesomatix A12 Steering Block Zero Trail Short.The Steering Block overall height is 1,4mm less, whic..
$31.50
A12-C1201-6.0
C1201-6.0 Servo PlateC1201-6.0 Servo Plate can be only used in combination with Awesomatix C1205-6.0..
$17.00
A12-C1205-6.0
C1205-6.0 Suspension PlateC1205-6.0 Suspension Plate can be only used in combination with C1201-6.0 ..
$41.00
A12-CS-1
CS-1 Carbon Spool SetAwesomatix A12 Carbon Spool Set contains:1x A12-AT12081x A12-C12061x A12-SH12R5..
$58.00
A12-EHRC
EHRC SetEHRC (Extra High Roll Center) set is +3,8mm higher roll center measured from the lower face ..
$21.50
A12-ELRC
ELRC SetELRC (Extra Low Roll Center) set is what we used in the first A12 car.It is a 0mm positioned..
$34.50
A12-GD
A12 Gear Diff SetThe A12-GD set contains: 1x ST12171x ST12181x ST12311x ST12321x AT12191x AT122..
$110.50
A12-HRC
HRC SetHRC (High Roll Center) set is +2mm higher roll center measured from the lower face of AM1204 ..
$17.50
A12-OR127
OR127 1.2x7mm O-Ring for SCSOptional Awesomatix 1.2x7mm O-Ring for use with SCS set.The o-ring acts ..
$2.50
A12-RHG4.2
RHG4.2 Ride Height Gauge setAwesomatix A12 Ride Height Gauge set contains: 1x A12-AT12101x A12-ST121..
$40.50
A12-SB3X7AL
SB3X7AL - M3x7 Alloy Screw for Rear Wheels x 6Precision machined 7075 T6 alloy screws to mount the r..
$10.50
A12-SCS
SCS Spherical Contact Shims setThe Spherical Contact Shims set can be installed in the rear ball joi..
$12.00
A12-SPR12F-C0.7
SPR12F-C0.7 Front Spring x 2Awesomatix A12 Front Spring C0.7 (PINK)contains: 2x A12-SPR12F-C0.7..
$6.00
A12-SPR12F-C1.1
SPR12F-C1.1 Front Spring x 2Awesomatix A12 Front Spring C1.1 (DARK BRASS)contains: 2pcs SPR12F-C1.1..
$6.00
A12-SPR12S0.6
SPR12S0.6 Side Spring C0.6 x 2Optional Awesomatix A12 Side Spring C0.6 (GOLD)contains: 2x A12-SPR12S..
$6.00
A12-SSS
SSS Spring Steel Spool SetSame spool axle that is included in the A12 kit -- just packaged to includ..
$46.50
A12-SSS-1
SSS-1 Spring Steel Spool SetAxle design is different than the A12 kit one piece spool axle. Le..
$58.00
A12-ST1202-XS
ST1202-XS Damper Rotor x 2Awesomatix A12X Damper Rotor - full steel 1-piece part instead of 2-piece ..
$26.00
A12-ST1208-C5AL
Awesomatix A12 Alloy Steering Block Post 5deg.With the use of this parts, the weight is reduced on 2..
$36.00
A12-ST1208-C6AL
ST1208-C6AL Alloy Steering Block Post 6deg. x2Awesomatix A12 Alloy Steering Block Post 6deg.With the..
$36.00
A12-ZT-1
ZT-1 Zero Trail SetZT-1 set is the updated version of the ZT set. The difference are the front..
$120.00
A800-AM14H
AM14H Steering Arm x 2AM14H Steering Arms are a special stronger version of the AM14LS steering arms..
$20.00
A800-AM180EVO2
AM180EVO2 SB BellcrankAM180EVO2 SB Bellcrank for the Single Bellcrank Steering.The EVO2 version is a..
$23.50
A800-AM19-LTL
AM19-LTL Upper Arm Holder x 2In normal positions these holders provide +1mm longer top link compared..
$26.00
A800-AM23-R
AM23-R Rear Steering Arm x 2This version is longer compared to the previous AM23-1 Rear Steering Arm..
$19.00
A800-AM279
AM279 Rear Belt TensionerAwesomatix AM279 Rear Belt Tensioner for A800R. Mounted on the chassis..
$14.00
A800-APS
APS Additional Progressive Spring setThe APS - Additional Progressive Spring set is designed for use..
$59.00
A800-AT03R
AT03R Spool AxleNew spool design with reduced weight (only 2,6g.) and improved rigidity.Only compati..
$21.00
A800-AT139
AT139 Fan HolderAT139 Fan Holder for A800MMX and A800FX models. Can be screwed directly to the ..
$15.50
A800-AT143
AT143 ARB Stiffener x 2New optional parts for A800RThe AT143 ARB Stiffener increases stiffness of th..
$16.00
A800-AT144
AT144 ULCG Battery Clamp x2AT144 ULCG Battery Clamp (2pcs) is specially designed for the use of mode..
$25.50
A800-AT248
AT248 Lower Bumper PostNew optional parts for A800RAT248 reduces the local load on the area of the f..
$5.50
A800-B106RC/Z
B106RC/Z Ball Bearing Ceramic x 2High quality Ball Bearings with Si3N4 ceramic balls.The optimum to ..
$12.00
A800-B84RC/Z
B84RC/Z Ball Bearing CeramicHigh quality Ball Bearings with Si3N4 ceramic balls.The optimum to reduc..
$6.00
A800-BAS
BAS Belt Anti Skip setThe Belt Anti Skip set (BAS) is designed for Modified racing purpose with "big..
$17.50
A800-BBS-1C
BBS-1C Ceramic Drivetrain Ball Bearings Set for A800High quality Ball Bearings with Si3N4 ceramic ba..
$78.50
A800-BDL
BDL - Body Downtravel Limiter SetThe Body Downtravel Limiter set gives the possibility to setup an b..
$16.50
A800-BW10
BW10 Weight 10gBW10 Weight to install at the electronics side on AM177 Motormount. contains:1pc..
$14.00
A800-BW7
BW7 Weight 7gBW7 Weight to install at the battery side on AM177 Motormount (behind the spur gear).&n..
$15.50
A800-BW8
BW8 Weight 8gBW8 Weight to install at the battery side on AM177 Motormount (in front of spur gear).&..
$14.00
A800-C01B-RAF
C01B-RAF Flex Alloy Lower DeckAwesomatix C01B-RAF Flex Alloy Lower Deck.2.0mm 7075 T6 Flex Alloy Cha..
$104.00
A800-C04AL1-LA
C04AL1-LA Alloy Long Arm SetC04AL1-LA Alloy Long Arm Set includes: 2x C04AL1+9.0 2x ..
$96.00
A800-C07-RF
C07-RF Flex Carbon BumperThe Flex Carbon Bumper is designed for use with P14-1-R Lower bumper.Requir..
$17.00
A800-C07R
C07R Carbon BumperNew optional parts for A800RC07R - Carbon Bumper R is designed for use with P14-1-..
$16.00
A800-C127-G
C127-G Top DeckC127-G Top Deck (1pcs) for use with AM177 Motormount.Made from 1.5mm Glassfiber Mater..
$25.00
A800-C127S-G
C127S-G Top DeckC127S-G Top Deck (1pcs) for use with AM177 Motormount.Soft version. Made from 1.5mm ..
$25.00
A800-C204-S
C204-S Suspension Arm set x 4Awesomatix C204-S Suspension Arm set x 4contains: 2x C204L2x..
$64.00
A800-C204-S-1
C204-S-1 Suspension Arm set x 4Awesomatix C204-S-1 Suspension Arm set x 4It narrows the t..
$64.00
A800-C204L-1
C204L-1 Suspension Arm - 1mm shorter left sideAwesomatix C204L-1 Suspension Arm.This version is 1mm ..
$17.50
A800-C204R-1
C204R-1 Suspension Arm - 1mm shorter right sideAwesomatix C204R-1 Suspension Arm.This version is 1mm..
$17.50
A800-C27MMX
C27MMX Full Length Top Deck for A800MMXOptional Awesomatix A800MMX Long Top Deck.Offers the possibil..
$40.00
A800-C27MMX-G
C27MMX-G Full Length Top DeckOptional Full Length Top Deck for A800MMX and A800R.Made from 2.0mm Gla..
$41.00
A800-FD
FD - Flex Damper set1. FD set provides an additional torsional flex of the car's end where it is ins..
$51.50
A800-FSS
FSS - Forward Shifted Servoholder setThis set also allows the ESC to be placed in front of the motor..
$62.00
A800-HRB
HRB Horizontal Rear Bodypost SetThe Horizontal Rear Bodypost Set (HRB) lowers the center of gra..
$37.00
A800-IFJ
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 11.0px Menlo} span.s1 {font-variant-ligatures: no-comm..
$29.00
A800-OR1.8-90
OR1.8-90 FBS O-Ring x 2Spare O-Rings (90shore) for FBS set.contains: 2pcs OR1.8-90..
$2.50
A800-OR2005V
OR2005V ST122-1 O-Ring x 8New optional parts for A800RSpare OR2005V O-Ring for use with ST122-1 Damp..
$4.50
A800-P13-4-S18
P13-4-S18 Ball End x18Awesomatix P13-4 Ball End set 18pcs. Spare/ replacement set for full car ..
$17.00
A800-P138A
P138A 38T PulleyP138A 38T Pulley. Replaces P138 and P138-1.More precise. Narrow profileFor A800 / A8..
$9.50
A800-P138A-LF
P138A-LF 38T Pulley Low FrictionP138A-LF 38T Pulley.Replaces P138LF and P138LFAMore precise. Narrow ..
$10.50
A800-P58
P58 Belt TensionerRequired parts to complete-B63SS x2SB3x8Second picture shows P58 installed in Sam ..
$3.50
A800-P63-R
P63-R Damper Piston x4For ADC enabled D2 dampeners or new A800R D3 DampenersP63-R Damper Pistons for..
$10.50
A800-P64S
P64S Rear Body Holder - SoftOptional P64S Rear Body Holder for Awesomatix A800R.This version is soft..
$6.50
A800-P74
P74 Progressive Spring Holders SetOptional P74 Progressive Spring Holders set.Can be installed direc..
$5.50
A800-PSS
PSS Progressive Spring SystemA800-PSS set is designed to add 15% or 25% progressively into the origi..
$30.50
A800-SC2X22
SC2X22 M2x22 Cap Head Screw x 2 Optional screw for BDL set especially popular on FWD bodies..
$2.50
A800-ST05-R
ST05-R Damper Rod x 4New optional parts for A800RST05-R adds "friction type" damping into the suspen..
$18.50
A800-ST122-1
ST122-1 Damper Screw set x 8New optional parts for A800ROptional ST122-1 Damper screws with OR2005V ..
$17.00
A800-ST123
ST123 - M2.5X7 Arm Screw x 8Awesomatix ST123 - M2.5X7 Arm Screw x 8CNC Machined Steel Screws. P..
$8.50
A800-ST17-1US-S
ST17-1US-S Universal Ring SetExtra strong steel ring set for Awesomatix double universal joints.Espe..
$17.00
A800-ST69-00-R
ST69-00-R Linear Spring Screw x2ST69-00-R Optional Linear Spring Screw for AT119 Progressi..
$10.00
A800-ST69-25-R
ST69-25-R Progressive Spring Screw 25% x2ST69-25-R Optional Progressive Spring Screw for AT119 Progr..
$10.00
A800-T02
T02 Multi Tool5,5mm/6,5mm/7,0mm wrench which is made from high grade stainless steel with laser engr..
$11.50
A800-TW5
TW5 Tungsten Weight 5g.5g. Weight made from Tungsten Material. Fits into C01B-RAF Flex Alloy ch..
$10.50
A800FX-BW95
BW95 Floating Front WeightBW95 is a new Floating Front Weight for the A800FX & A800FX Evo cars.&..
$47.50
A800FX-C01FXC
C01FXC Carbon Lower DeckC01FXC 2,2mm high grade carbon lower for A800FX FWD car.This chassis is sho..
$114.50
A800FX-C27FX-L
C27FX-L Top Deck LongOptional Awesomatix A800FX Evo Long Top Deck.Also suitable for A800FX car.Offer..
$40.00
AwesomatixUSA A12 Carbon Side Brace
AUSA-A12-Carbon-Side-Brace AwesomatixUSA A12 Carbon Side Brace replaces the A12-AM1205 and moun..
$62.00
AwesomatixUSA C45F-1.0mm Front Brace
A800R Optional Part from AwesomatixUSA to provide a thinner 1.0mm front dampener brace to adjust fle..
$12.00
AwesomatixUSA C45F-1.5mm Front Brace
A800R Optional Part from AwesomatixUSA to provide a thinner 1.5mm front dampener brace to adjust fle..
$12.00
AwesomatixUSA C45F-2.5mm Front Brace
A800R Optional Part from AwesomatixUSA to provide a thicker 2.5mm rear dampener brace to adjust flex..
$12.00
AwesomatixUSA C45R-1.0mm Rear Brace
A800R Optional Part from AwesomatixUSA to provide a thinner 1.0mm rear dampener brace to adjust flex..
$12.00
AwesomatixUSA C45R-1.5mm Rear Brace
A800R Optional Part from AwesomatixUSA to provide a thinner 1.5mm rear dampener brace to adjust flex..
$12.00
AwesomatixUSA C45R-2.5mm Rear Brace
A800R Optional Part from AwesomatixUSA to provide a thicker 2.5mm rear dampener brace to adjust flex..
$12.00
BS Works Awesomatix TC Spring Bender
Useful to create bent springs on your Awesomatix TCEasily change your springs to 100* or to 110*. An..
$30.00
BS Works Damper Storage Box (Set)-A800R
Damper Storage box (set) - A800R( damper not included)..
$20.00
BS Works Damper Workstation (Pair)-A800R
Damper Workstation (pair) - A800R( damper not included)..
$15.00
BS Works HRB Body Post System (10mm-15mm) Asphalt - A800R
HRB body mounting tools for Awesomatix A800R platform..
$15.00
BS Works HRB Body Post System (16mm-21mm) Carpet - A800R
HRB body mounting tools for Awesomatix A800R platform..
$15.00
BS Works P03 Device - Installer and Remover
The P03 Installer & Remover DeviceAt one end of the device you can safely pop the P03 off of you..
$10.00
CRC 3/16 x 5/16 Flanged Bearings
CLN3248Our favorite front wheel bearings for the Awesomatix A12 and Roche Rapide P12 Evo2..
$25.00
CRC 3/16" Front Axle Shims
From Team CRC, but prefect options for shimming your front tires on the A123/16" (.1875) x .010 shim..
$7.00
CRC Thin Foam Bumper
From Team CRC, but fits perfectly on the Awesomatix A12 after slightly opening up the outside holes ..
$2.50 $8.00
F1 Aluminum Chassis Width Adjust Spacer Set
F1 Aluminum Chassis Width Adjust Spacer SetRear Axle Width Spacers go in between the hub and F1 rear..
$6.00
FabTek Awesomatix A12 Pan Car Bumper
This FabTek wide profile bumper has been on our A12 cars since late 2021. The design is made w..
$13.00
FabTek Awesomatix A800 TC Bumper
Lightweight TC Bumper design from FabTek for the Awesomatix A800MMX and A800R platform. Battle..
$25.00
FabTek Roche P12V Pan Car Bumper
This FabTek wide profile bumper has been updated to better support the P12V car when in the long fro..
$13.00
Fenix Clips For Sphere Holder
Clips for sphere holder. Fit G56 - Mistral 2.0 - Mistral 3.3 - Xray X1 - Roche and all those models..
$6.00
Fenix Differential Springs
Differential springs.Keep you differential in proper shape… replace the inner springs periodically..
$5.00
Fenix F1 Additive Tool
New tool for F1 drivers to help with applying traction compound to tires..
$9.50
Fenix G56 200mm Fan Motor Brace
G562-211 G56 200mm fan motor braceFit Pivot and V-Link , LWB and SWB chassisCan be used with the mo..
$14.00
Fenix G56 235mm Fan Motor Brace
G562-201 G56 235mm fan motor braceFit Pivot and V-Link , LWB and SWB chassisCan be used with the mo..
$14.00
Fenix G56/mistral 2-0 Front Spring Soft Silver
M20-K16 G12 / G56 / Mistral 2.0 / Mistral 3.3 Front spring - soft - silver. Fit G56 - Mistral 2.0 -..
$5.00
Fenix G56/mistral 2-0 Roll Spring Soft Red
G12 - G56 / Mistral 2.0 - 3.3 Roll Spring - soft - red. Fit G56 - G12 Mistral 2.0 - Mistral 3.3..
$5.00
Fenix G56/Mistral 7075 Aluminum Front Arm Upper Mount Caster Block
Optional caster block for the G56 / Mistral 2 / Mistral 3.3 platform to provde extra rigidity..
$23.50
Fenix Long Imperial Kingpin
Optional kingpin for the G56 family of pan carsIf you drive a pancar you might find beneficial the u..
$19.00
Fenix Mistral 3.3 - 15° Caster Plate
15° upper plate for the Mistral 3.3 Hybrid Front End..
$10.00
Fenix Mistral 3.3 - 3°-9° Caster Plate
3° - 9° upper plate for the Mistral 3.3 Hybrid Front End..
$10.00
Fenix Mistral 3.3 Combo Hybrid Caster Plate
15 degree and 3-9 degree optional caster plates for Mistral 3.3 Hybrid Front End..
$19.00
Fenix Mistral 3.3 Fan Holder
M33-14 Mistral 3.3 - 2.0 Fan Holder. 2.5mm carbon fibre, layed in a quasi isotropic way. Compatibl..
$12.50
Fenix Mistral 3.3 Hybrid Front End
Hybrid front endSuper easy to set, with double caster position (6° - 12°), while camber has infinite..
$67.00
Fenix Mistral 3.3 Large Shock Holder
Justock esc is a popular mandatory ESC in several clubs and organization.Newer G3 is a bit larger th..
$13.50
Fenix Mistral 3.3 WTC High Wing Holder
M20-6H Mistral 3.3 WTC High Wing Holder moves the rear wing 10mm higher compared to the kit partsSu..
$14.50
Fenix Rear Wing Stay Set Tamiya F103
Wing stay for the Lotus 97This wing stay is durable enough for racing Classique Classic F1 BodiesAll..
$13.00
Fenix Set Of Alu Shims 1/4" x 0.5mm Red Rear Axle Shims
FX0093 SET OF ALU SHIMS (14 pcs. by 0.5mm) RED. A perfect item to fine setting the rear width ..
$6.50
Front Lower Arm Pivot, Hard
Front Lower Arm Pivot, HardSame part as 340178 but made with a harder plastic..
$6.00
King Pin Spacer, Black, M3.2x5x0.5
King pin spacer (1/8") for pan carsBlack color replacement for 510043..
$7.00
Lower Pivot Ball, Front Suspension, 2 pcs
Lower Pivot Ball, Front Suspension, 2 pcsImproves clearance between the spring and lower armHelps wh..
$4.00
M2.5x8mm Cap Head Wheel Screw, Black, 6 pcs
M2.5x8mm Cap Head Wheel Screw, Black, 6 pcsNew longer wheel screws to support CRC rims..
$7.00
M2.5x8mm Roundhead Screw, 10 pcs
M2.5x8mm Roundhead Screw, 10 pcsScrew used tohold the P12 Evo2 upper arm front ballstud / 310247..
$2.50
M3x4mm Aluminium Roundhead Screw, Black, 5 pcs
M3x4mm Aluminium Roundhead Screw, Black, 5 pcs..
$5.50
M3x6mm Alum Hex Screw for Micro Servo, Black, 4
M3x6mm Alum Hex Screw for Micro Servo, Black, 4..
$5.50
MXLR Awesomatix A800R ShockVac
Our MXLR A800R ShockVac is a specially designed case which holds the new designed Awesomatix dampers..
$37.00
OfficinaRC Alu Bearing Housing +/- 0.3mm for Awesomatix A800 (2)
OfficinaRC is pleased to present the new Alu Bearing Housing OFC-DT10-3-A.Quantity = 2These Bearing ..
$28.00
OfficinaRC Alu Bearing Housing for Awesomatix A800 (2)
OfficinaRC Bearing Housing directly replace the standard composite ones included in the kit.Quantity..
$28.00
OfficinaRC AT21ST-A-T Pivot Ball Titanium Grade 5 for Awesomatix (4)
Maximum smoothness and precision with weight saving.Made of 5 Grade ELI Titanium, this pivot ball re..
$20.00
OfficinaRC ST019 Titanium Top Deck Screw for Awesomatix (2)
Titanium screw replacements for the Awesomatix ST019Titanium alloyed with vacuum-melted aluminum van..
$18.50
OfficinaRC ST03-T Ball Stud Titanium Grade 5 for Awesomatix (2)
Make your model lighter, agile and sturdier.OfficinaRC Titanium Ball Studs are designed for the Awes..
$11.00
OfficinaRC ST03-T-M Ball Stud Titanium Grade 5 for Awesomatix (2)
2mm longer then ST03-T (8mm)Make your model lighter, agile and sturdier.OfficinaRC Titanium Ball Stu..
$11.00
OfficinaRC ST112 Titanium Centering Screw (4)
OfficinaRC ST112 Titanium Centering Screw (4)The OFC-ST112 Centering Screw is made of certified qual..
$17.00
OfficinaRC ST24-T 2 Ball Stud 4.8mm Titanium Grade 5 for Awesomatix (2)
Make your model lighter, agile and sturdier.OfficinaRC 4.8x6mm Titanium Ball Studs are designed for ..
$11.00
OfficinaRC ST24L-T Ball Stud 4.8mm Titanium Grade 5 for Awesomatix (2)
Make your model lighter, agile and sturdier.OfficinaRC 4.8x10mm Titanium Ball Studs are designed for..
$11.00
OfficinaRC ST24M-T 2 Ball Stud 4.8mm Titanium Grade 5 for Awesomatix (2)
Make your model lighter, agile and sturdier.OfficinaRC 4.8x8mm Titanium Ball Studs are designed for ..
$11.00
P12 2mm Upper Hinge Pin, Titanium Coated, 2 pcs
Replacement for part number 330017 used in P12, P10 and Xenon VSS front end..
$6.00
P12/P10 Pivot Ball, Front Suspension, POM, 4 pcs
P12/P10 Pivot Ball, Front Suspension, POM, 4 pcsDelrin based for smoother operation..
$8.00
Pivot Brace (Top & cover), Hard
Pivot Brace (Top & cover), HardSame part as 340154 but made of a harder plastic..
$5.00
Radtec Low Friction White Front Drive Belt (S3M351) for Stock (A800) Mid Motor
Radtec Low Friction White Front Drive Belt (S3M351) for Stock (A800) Mid Motor..
$14.00
Rapide Aluminum DVS-W2 Shock Spring Retainer (2mm offset)
Rapide Aluminum DVS-W2 Shock Spring Retainer (2mm offset)Replacement part for the DVS-W2 shock used ..
$8.00
Rapide DVS-V2 Shock POM Piston (4 Holes)
Rapide DVS-V2 Shock POM Piston (4 Holes)* THESE ARE 1/10 SPECIFIC NOT FOR 1/12*..
$4.50
Rapide F1 Aluminium Offset Steering Knuckle Set
Rapide F1 Aluminium Offset Steering Knuckle Set..
$30.00
Rapide F1 Aluminum Front Body Post Mount Set, Red/Black
Rapide F1 Aluminum Front Body Post Mount Set, Red/Black..
$8.00
Rapide F1 Aluminum Steering Arm Set (V2)
Rapide F1 Aluminum Steering Arm Set (V2)Optional steering bell crank replacing 310137..
$22.00
Rapide F1 EVO Aluminum Camber Bushing, 2 Dots (0.5/2.5)
Rapide F1 EVO Aluminum Camber Bushing, 2 Dots (0.5/2.5)..
$15.00
Rapide F1 EVO2 Aluminum Caster Adjuster (3.5/11)
Rapide F1 EVO2 Aluminum Caster Adjuster (3.5/11)..
$4.50
Rapide F1 EVO2 Aluminum Steering Arm Position Adjuster (1)
Rapide F1 EVO2 Aluminum Steering Arm Position Adjuster (1)..
$4.50
Rapide F1 EVO2 Graphite Rear Pod Plate
Rapide F1 EVO2 Graphite Rear Pod PlateNew option parts of graphite rear brace for Rapide for F1 EVO2..
$7.00
Rapide F1-EVO3 Graphite Upper Deck, Flex Version
Rapide F1-EVO3 Graphite Upper Deck, Flex Version..
$13.50
Rapide F1/P10/P12 Aluminum Pod Link Mount Set
Rapide F1/P10/P12 Aluminum Pod Link Mount SetLatest version of an alloy alternative for the plastic ..
$28.00
Rapide Optional DVS-W Shock Spring Retainer (2mm offset)
Allows for more droop on the P12-2017 shock set..
$5.00
Rapide P10W EVO2 (-1mm) Aluminum Front Lower Bulkhead (L)
Rapide P10W EVO2 (-1mm) Aluminum Front Lower Bulkhead (L)..
$15.00
Rapide P10W EVO2 (-1mm) Aluminum Front Lower Bulkhead (R)
Rapide P10W EVO2 (-1mm) Aluminum Front Lower Bulkhead (R)..
$15.00
Rapide P10W EVO2 Aluminum Side Link Angle Adjuster (Center)
Rapide P10W EVO2 Aluminum Side Link Angle Adjuster (Center)..
$8.00
Rapide P10W EVO2 Long Wheelbase (+8mm) Upper/Lower Pod Plate Set
Rapide P10W EVO2 Long Wheelbase (+8mm) Upper/Lower Pod Plate Set..
$35.00
Rapide P12 Ball Differential Set
Complete Rapide P12 Ball Differential SetUseful for rubber tire 1/12th racingCan convert any existin..
$48.00
Rapide P12 EVO Aluminum Front Upper Arm Caster Block, Red
Rapide P12 EVO Aluminum Front Upper Arm Caster Block, Red..
$22.00
Rapide P12 EVO Aluminum Front Upper Bulkhead (+1mm)
Rapide P12 EVO Aluminum Front Upper Bulkhead (+1mm)..
$22.00
Rapide P12 EVO Aluminum Front Upper Bulkhead (-1mm)
Rapide P12 EVO Aluminum Front Upper Bulkhead (-1mm)..
$22.00
Rapide P12 EVO Graphite Front Upper Bulkhead Plate, 0.5mm, 4pcs
Rapide P12 EVO Graphite Front Upper Bulkhead Plate, 0.5mm, 4pcs..
$10.00
Rapide P12 EVO2 Aluminum Main Chassis, Short Version
Rapide P12 EVO2 Aluminum Main Chassis, Short Version..
$75.00
Rapide P12 EVO2 Graphite Battery Backstop, Short Version
Rapide P12 EVO2 Graphite Battery Backstop, Short Version..
$10.00
Rapide P12 EVO2 Graphite Front Lower Arm & Bulkhead Set
Rapide P12 EVO2 Graphite Front Lower Arm & Bulkhead Set..
$38.00
Rapide P12 EVO2 Graphite Front Lower Arm (Short Wheelbase), Left
Rapide P12 EVO2 Graphite Front Lower Arm (Short Wheelbase), Left..
$13.50
Rapide P12 EVO2 Graphite Front Lower Arm (Short Wheelbase), Right
Rapide P12 EVO2 Graphite Front Lower Arm (Short Wheelbase), Right..
$13.50
Rapide P12 EVO2 Graphite Front Lower Arm (V2), Left
Rapide P12 EVO2 Graphite Front Lower Arm (V2), Left..
$13.50
Rapide P12 EVO2 Graphite Front Lower Arm (V2), Right
Rapide P12 EVO2 Graphite Front Lower Arm (V2), Right..
$13.50
Rapide P12 EVO2 Steering Pivot Ball, Spring Steel
Rapide P12 EVO2 Steering Pivot Ball, Spring Steel..
$15.00
Rapide P12/F1 Carbon Rear Solid Axle Set, Black
New for 2024Black anodized version of the popular Roche spool(picture pending update)..
$15.00
Rapide P12G EVO Aluminum Front Upper Bulkhead, Black
Rapide P12G EVO Aluminum Front Upper Bulkhead, Black..
$12.00
Rapide P12V Aluminum Main Chassis (V2)
New chassis option for the Roche P12V that reduces the front end area to increase speed by reducing ..
$55.00
Rapide P12V Chassis Weight, 6g x2
P12V Optional PartChassis weight set (6g x2) for tuning chassis roll to suit different track conditi..
$12.00
Rapide P12V Graphite Front Lower Arm (Wide Version)
P12V Optional PartIncreased 3mm width on graphite front lower arm. Less aggressive steering, m..
$25.00
Roche Rapide F1 EVO2 Graphite Narrow Front Arm Set, -4mm
Fitting the Rapide F1 Evo2 and Rapide F1 Evo3 platform to facilitate a narrow wheelbase necessary fo..
$28.00
Roche Rapide P12/F1 Steel Rear Solid Axle
New option part for 1/12th, 200mm pan cars and F1 carsThe steel spool axle will be a great option fo..
$20.00
Speed Zombi Ball Cup Turnbuckle Tool for Awesomatix
This tool has been in our pit bags for years -- and now we are bringing it to youSaves you hands whi..
$20.00
Steering Knuckle Set (Low Height)
New Steering Knuckle Set (Low Height) for Rapide P12/P10. It makes more angle adjusment on upper arm..
$5.50
Steering Knuckle Set, 1 Deg, Hard
Steering knuckle with built in camber to get less roll center change in the front end of you 12th sc..
$5.50
Titanium Turnbuckle Set for Rapide F1 (3 pcs)
Titanium Turnbuckle Set for Rapide F1 (3 pcs)..
$12.00
Titanium Turnbuckle Set for Rapide F1 (3 pcs), Rainbow Color
Titanium Turnbuckle Set for Rapide F1 (3 pcs), Rainbow Color..
$13.50
Willspeed 12mm Buggy Spring - Front - Blue 4.9lbs
Willspeed 12mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$7.50
Willspeed 12mm Buggy Spring - Front - Green 4.7lbs
Willspeed 12mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$7.50
Willspeed 13mm Buggy Spring - Front - Blue 5.0lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Front - Green 4.8lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Front - Orange 4.25lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Front - Red 4.5lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Front - Yellow 4.0lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Rear - Blue 2.5lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Rear - Green 2.35lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Rear - Orange 2.15lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Rear - Red 2.25lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed 13mm Buggy Spring - Rear - Yellow 2.0lbs
Willspeed 13mm Ø Buggy SpringsA comprehensive spring range to cover all demands and requirements fac..
$9.00
Willspeed AE B7 +2mm Rear Link Mount
+2mm Rear Link Mount for the Team Associated B7. Manufactured in T6082 Aluminium with inbuilt +..
$19.50
Willspeed AE B7 / Yokomo YZ2 One Piece Wing Brace Front
B7 - YZ2 - Carbon Fibre Front Wing BraceSingle Piece Carbon Fibre Front Wing Brace for Team Associat..
$6.00
Willspeed AE B7 316 Stainless Steel Under Servo Weight 24G
Machined 316 Stainless Steel Under Servo Weight for the Team Associated B7. Weighs 24 Grams whi..
$33.50
Willspeed AE B7 73mm Arm Wide Pivot C and D Block Set
B7 73mm Arm Wide Pivot C and D Block Set!That's right, a wide pivot set to be used with the 73mm Wis..
$63.50
Willspeed AE B7 Aluminium +2 -2 Caster Block Link Mounts
B7 - Aluminium +2 -2 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating +2m..
$33.50
Willspeed AE B7 Aluminium +4 +0 Caster Block Link Mounts
B7 - Aluminium +4 +0 Caster Block Link Mounts. Manufactured in 7075 Aluminium incorporating 0mm..
$33.50
Willspeed AE B7 Carbon Front Roll Centre Shims 0.5mm (2)
Carbon Fibre Roll 0.5mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pc..
$13.00
Willspeed AE B7 Carbon Front Roll Centre Shims 1mm (2)
Carbon Fibre Roll 1mm Front Roll Center Shims for Team Associated B7. Supplied as a pair (2pcs)..
$13.00
Willspeed AE B7 Carbon Motor Mount
Available for back order starting August 13 2024W3071 Willspeed AE B7 Carbon Motor MountCarbon Fibre..
$18.00
Willspeed AE B7 Carbon Wing Button
B7 - Carbon Fibre Rear Wing BraceSingle Piece Carbon Fibre Rear Wing Brace for Team Associated B7.WS..
$9.00
Willspeed AE B7 Front Aluminium Ball Stud Mount
Front Aluminium Ball Stud Mount for the Team Associated B7. Manufactured in T6082 Aluminium wit..
$46.00
Willspeed AE B7 Front Bulkhead 316 Stainless Steel Hanger 0 Deg
B7 - HD 316 Stainless Steel 0° Front BulkheadManufactured in 316 Stainless Steel with a 35% increase..
$41.00
Willspeed AE B7 Front Bulkhead 316 Stainless Steel Hanger 2.5 Deg
B7 - HD 316 Stainless Steel 2.5° Front BulkheadManufactured in 316 Stainless Steel with a 35% increa..
$41.00
Willspeed AE B7 Front Bulkhead 7075 Hanger 0 Deg
Willspeed AE B7 Front Bulkhead 7075 Hanger 0 DegManufactured in 7075 Aluminium with a 35% increase i..
$34.50
Willspeed AE B7 Front Bulkhead 7075 Hanger 2.5 Deg
B7 - HD 7075 Aluminium 2.5° Front BulkheadManufactured in 7075 Aluminium with a 35% increase in cros..
$34.50
Willspeed AE B7 Machined PEEK Idler Gears with Bearings (3)
Machined 26T PEEK Idler Gears Set (3) for the Team Associated B7. We wanted to create the ultim..
$41.00
Willspeed AE B7 O-Ring Carbon Battery Mount
Open media 1 in gallery viewB7 - Carbon Fibre O-Ring Battery Mount SetO Ring Style Carbon Fibre Batt..
$19.50
Willspeed AE B7 One Degree Strengthened C Block
B7 - B7 One Degree Strengthened C BlockB7 One Degree C Block! With all pills in central position wit..
$25.50
Willspeed AE B7 Osprey Bodyshell Lightweight
Willspeed "Osprey" Bodyshell for the Team Associated B7. Low profile, sleek, stylish. Go catch ..
$28.00
Willspeed AE B7 Osprey Bodyshell Standard Weight
Willspeed "Osprey" Bodyshell for the Team Associated B7. Low profile, sleek, stylish. Go catch ..
$28.00
Willspeed AE B7 Std Strengthened Full Brace D Block
B7 - Strengthened "Full Brace" D BlockB7 Strengthened "Full Brace" D BlockWith the B7 series the D b..
$38.50
Willspeed AE B7 Strengthened C Block
B7 - Strengthened C BlockB7 Strengthened C Block!Manufactured in T6082 Aluminium with increased wall..
$25.50
Willspeed AE B7 Strengthened D Block
B7 Strengthened D Block!If our "Full Brace" option D block is not for you, then look no further.&nbs..
$25.50
Willspeed Low Drag Rear Wing (3)
Willspeed Low Drag Rear Wing (3)3 pack of a new design wing--Durable, stylish and affordable 1/10th ..
$25.50
Willspeed RF3 25G Under LIPO Weight Set - 6x 4.2G
Optional brass weights for the RF3 chassis (AE or TLR) that go under the LIPO battery6x 4.2G weights..
$23.00
Willspeed RF3 2mm Side Rail Pair
Optional part for the RF3 platform - supporting TLR 22 5.0 or AE B6.4 conversion kits..
$18.00
Willspeed RF3 31G One piece Lipo Weight
Willspeed RF3 optional partBrass one piece under lipo weight 31g..
$19.50
Willspeed RF3 37G Brass Radio Tray
Willspeed RF3 optional partBrass removable radio tray 37g..
$18.00
Willspeed RF3 Penguin Slayer Bodyshell Cab Forward
Optional design body for the RF3Slayer Bodyshell for the Willspeed RF3 Conversions.(Fits TLR and AE ..
$25.50
Willspeed RF3 Raven Bodyshell - Lightweight
New lightweight body for the Willspeed RF3 conversion kitsBody comes clear / unpainted..
$25.50
Willspeed RF3 Shock Tower V3
Version 3 of the WIllspeed RF3 Shock TowerA design focusing on a central 7075 Aluminium Tower Mount ..
$42.00
Willspeed RF3 Shock Tower V3 - Carbon Blade
Replacement "carbon blade" part for the new RF3 Shock Tower V3..
$18.00
Willspeed RF3 Take 3 Carbon Rear Shock Tower Support - Pair
W3039 Willspeed RF3 Take 3 Carbon Rear Shock Tower Supports - PairLow Profile Carbon Rear Shock..
$18.00
Willspeed RF3 TLR Carbon Skid Plates (pair)
Replacement Skid Plates for the Willspeed TLR RF3 Conversion...
$18.00
Willspeed Schumacher 30T PEEK Idler Gear
Schumacher 30T LD3 PEEK Idler GearWe came and we conquered with our PEEK idler gears for the B7 and ..
$15.50
Willspeed TLR 22 5.0 RF3 Buggy Conversion Kit - Full Carbon Edition
Full Carbon Kit:Replaces -1x Carbon Fibre Shock Tower Uprights (pair) with 1x Carbon Fibre 'Ta..
$375.00
Willspeed Universal 2mm Carbon Fibre Battery Tabs (2)
Universal 2mm Carbon Fibre Battery Hold Down Tabs.Supplied as a pair (2pcs)..
$6.50
Willspeed Yokomo YZ2 Front Shock Tower
Yokomo YZ2 Front Shock Tower. Replicates original geometry with added half hole shock mounting ..
$18.50
Willspeed Yokomo YZ2 One Piece Wing Brace Rear
Single Piece Carbon Fibre Rear Brace for Yokomo YZ2 Models.WS Logo Engraved.Manufactured from premiu..
$9.00
Willspeed Yokomo YZ2 Rear Shock Tower
Yokomo YZ2 Rear Shock Tower. Replicates original geometry with added half hole shock mounting l..
$23.50
Xenon Axle Height Adjuster, OP Version (0)
Pair of 0.00mm offset axle holdersSame as Roche 240172..
$6.00
Xenon Axle Height Adjuster, OP Version (0.25)
Pair of 0.25mm offset axle holdersSame as Roche 240173..
$6.00
Xenon Axle Height Adjuster, OP Version (1.75)
Pair of 1.75mm offset axle holdersSame as Roche 240179..
$6.00
Xenon Axle Height Adjuster, OP Version (2.00)
Pair of 2.00mm offset axle holdersSame as Roche 240180..
$6.00
Fenix G12 - CRC Long Arm Mount
Optional part to allow the use of the CRC3348 Long Arm on the G12Includesnecessary longer screwsExcl..
$25.00
Fenix G12 Front Shims - Thin 0.6 and 1.0mm
4pcs by 0.6mm and 4pcs by 1mm carbon fibre, for a super fine front end tuning.Fit CRC 3240 Front End..
$10.50
Fenix G12 Sphere Link (long Link)
Side Link Pivot Balls for the support of running Long Links (made by Roche)Roche Part Number 31..
$9.00
Fenix G56 - CRC Long Arm Mount
G56 - CRC Long Arm MountOptional part to allow the use of the CRC3348 Long Arm on the G56 with G5606..
$25.00
Fenix G56 - WIDE - CRC front end
G56060L - G56 - WIDE - CRC front end4mm wider than regular G56060, suited for fast flowing tra..
$34.50
Fenix G56 CRC Front End
Optional part for the 235mm configuration to install a CRC Pro Strut Front End..
$34.50
