A12
AM1202 Motor Mount..
$22.00
AM1205 Side Stiffener..
$15.50
AM1206 Front Nut..
$12.00
AM1207 Left Bulkhead..
$22.00
AT1201 Steering Block Nut x 2..
$5.00
AT1202 Servo Post x 2..
$12.00
AT1203 Rear Beam..
$23.50
AT1206 Servo Plate Post x 2..
$9.50
B156 Flanged Bearing x 43/16 x 5/16 Flanged bearing..
$8.50
B168 Flanged Bearing x 2..
$6.50
C1201 Servo Plate..
$16.50
C1203 Body Holder..
$16.50
C1204 Bumper Plate..
$14.00
C1205-1.5 Suspension Plate..
$40.50
DT1202 Steering Washer x 2..
$5.00
OR125 1.2x5mm O-Ring x2ORing used when mating the inner and outer frame together..
$2.50
OR15 1x5mm O-Ring x 2ORing used on the rear axle bearing..
$2.50
OR153V 1.5x3mm O-Ring x2Rear Dampener ORing..
$2.50
OR155SI 1.5x5mm O-Ring x4Red ORing for use within the front spindle..
$6.50
OR230 2x30mm O-RingBattery retention ORing..
$2.00
OR91 9x1mm O-RingSpool Spur ORing used with thick / ball diff-styled spur gears..
$1.50
OR915 9x1.5mm O-RingSpool Spur ORing used with thin / TC-styled spur gears..
$1.50
P1213 Ball Cup 4.0mm x 2..
$2.50
P1215 Foam Bumper..
$9.50
SB3X5S - M3x5 Small Button Head Screw x6The unknown part of the A12 kit -- these screws have special..
$6.00
SC25X8 M2.5x8 Cap Head Screw x 2..
$1.50
SC3X6 M3x6 Cap Head Screw x 6..
$3.50
SC3X8 M3x8 Cap Head Screw x 6..
$3.50
SH1.5W Spacer x 3On the A12, shims used to mate the inner and outer frame and bumper together..
$5.00
SH12F0.5 Front Axle Shim x 4..
$3.50
SH12R0.5 Rear Axle Shim x4..
$6.00
SH12R2.0 Rear Axle Spacer 2.0mm x 2..
$3.50
SH12R3.5 Rear Axle Spacer 3.5mm..
$2.50
SH12S-0.2 Spring Shim x14On the A12, shims used to adjust the height of the spindle and apply differ..
$6.00
SH4.0 6x3x4.0mm Spacer x 4On the A12, shim used to space the body / spring holder from the inner cha..
$6.00
SPR12S0.5 Side Spring C0.5 x 2..
$6.00
ST1201 3mm Ball Stud x 2..
$6.00
ST1202 Damper Rotor..
$14.00
ST1203 Downstop Rod..
$9.50
ST1204 Damper Case..
$25.50
ST1205 Ball Cup x 2..
$12.00
ST1207 Steering Block Tube..
$13.00
ST1209-L Ball Stud Long..
$6.00
ST1209-M Ball Stud..
$6.00
ST1211 Spring Retainer x 2..
$9.50
ST24-4.0 4.0mm Ball Stud x 2..
$3.50
STA1212 Composite AxleOne piece Spool Axle design that doesn't require an additional "right hub" to ..
$35.00
P06-1 - Downstop Collar x 5This downstop collar is slotted to resist twisting, replacing the A700-P0..
$6.00
P13-4 Open Ball End x 2The parts are designed to replace the standard upper inner pivots for the cam..
$2.50
SH0.5 - 6x3x0.5mm Spacer (Silver) x 10..
$7.00
SH1.0 - 6x3x1.0mm Spacer (Gray) x 10..
$7.00
SPR05 - Body Clip x 8..
$6.00
SS3X10 - M3x10 Set Screw x 4On the A12, used as the droop screw for the rear dampener..
$3.50
AT25-2 - Turnbuckle 39mm x 2..
$8.50
P14-2 - Body Post x4..
$9.50
SB3X5AL - M3x5 Alloy Button Head Screw x 8..
$12.00
SH0.25 - 6x3x0.25mm Spacer (Silver) x 10..
$7.00
STS-A12 A12 Stickers Sheet..
$6.00
Showing 1 to 60 of 60 (1 Pages)
